Applying Wood Trim To Old Kitchen Cabinet Doors

14 Nov, 2017 Post a Comment

Diy mdf shaker cabinet doors. As the doors ended so did the top of the cabinet.

Large Size Of Kitchen Cabinet Door Molding Profiles Cabinet Door

If necessary sand built up grease edges.

Applying wood trim to old kitchen cabinet doors. From drab to fab. Cut inside mdf trim. November 5 2015 by admin 55 comments.

Remove doors and drawers and all hardware. Put hardware in a safe place being careful not to lose anything. Adding trim to cabinet doors has obviously been done before.

The first step is prepping the mdf strips. We built a frame that would sit on top of the cabinet and that we could attach the trim to the frame above the cabinet. The steps involved were as follows.

Wherever some of the old finish has disappeared and the wood has become water stained start by sanding off whatever remains of the old finish with 120 grit sandpaper. Finally protect both stain and wood with two coats of minwax helmsman spar urethane. We are moving and i would like to brighten up the kitchen and the dark wood kitchen cabinets with white but nervous on choosing the whites because i don t want it to look like like too much.

Lightly sand all surfaces with fine grit 220 sandpaper. The frame measures the exact same size as the sides and front of the cabinet. Wash all wood with tsp.

Here is my kitchen and sliding door before. Use wood putty to fill in the gaps at the mitered corners and to fill in any nail holes. I am really thinking about giving the cabinets a face lift like you have done.

Miter the edges at 45 degrees and pin nail them to all four sides to cover the raw edge of the plywood. Then apply the minwax stain that best matches the surrounding trim. Wipe down all surfaces.

Attach the molding and finish the doors with the four sides of the frame mitered attach the lip molding to the cabinet door first with a thin layer of glue then secure it with a nail gun image 1. Adding trim to cabinets. Learn how adding wood trim to kitchen cabinets is not as hard you might think.

Thanks for all your pictures. One day i was waiting at the paint counter at lowe s there was a bucket of yardsticks and i was thinking that i should buy wood trim that size because it s exactly the look i had in mind flat shaker style and the width of the boards were still small enough for the tiny drawers. The first problem was that there was no lip on the cabinet in which to add molding.

Install the mdf trim to the door. To do this sand the edges with 220 grit sandpaper to give them a smooth finish. Cut mdf trim for sides of cabinet door.

I am thinking about doing this to our flat faced cabinet doors and drawers too and. Start by cutting 1 4 inch by 13 16 inch strips of hardwood to match the species of the door. I just came across your site.

I have similar old 1960s cabinets.

Kitchen Cabinets Makeover Old Kitchen Cabinets Diy Kitchen Diy